As you can see in my screenshot, I was originally manufacturing toilet cleaner in my factory.
I decided to change tact, but unfortunately, I cannot change the manufacturing slot from toilet cleaner to tissues (What I want) without having to 'buy' the manufacturing sector again
Here is a savefile link too
https://dl.dropbox.com/u/23145017/MATH_001.zip
Bug: Unable to change manufacturing
-
- Level 6 user
- Posts: 460
- Joined: Thu Jan 13, 2011 5:05 am
- David
- Community and Marketing Manager at Enlight
- Posts: 9425
- Joined: Sat Jul 03, 2010 1:42 pm
- Has thanked: 23 times
- Been thanked: 66 times
Re: Bug: Unable to change manufacturing
I believe that you are using a layout plan for this factory and the layout plan is set to manufacture toilet cleaner.
If I remember correctly, the original Cap2 also functions this way - if you want to change the setting of a manufacturing unit which was installed using the layout plan, you will have to remove the unit and set up a new one.
If I remember correctly, the original Cap2 also functions this way - if you want to change the setting of a manufacturing unit which was installed using the layout plan, you will have to remove the unit and set up a new one.
-
- Level 6 user
- Posts: 460
- Joined: Thu Jan 13, 2011 5:05 am